I created a cylinder with 8 sides and then inserted an edge with the edge loop tool near the top of the cylinder. I then selected the newly created faces and extruded them. After adjusting the extrusions I added some edged around the extruded shape so that when I smooth it out it will keep it's shape. I duplicated the pipe and rotated the duplicate 180 degrees. I deleted the middle faces on the top of the second pipe piece and then duplicated it and moved the duplicate inside of the building with the top sticking out of the roof. I combined the pipe inside the building with the top pop on the left and then with the top edges of both pipes used the bridge tool with smooth path + curve selected. I adjusted the curve of the pipe. I added a few edges on the pipes and adjusted them around to make the pipe not so perfect. I made another thinner and longer cylinder, duplicated it and rotated the duplicate 90 degrees and then bridged the two.
No comments:
Post a Comment